// //
Geotest equipments Home Product News About us Contact us French
tag:磁力搜
 PRODUCTS  SHOW 
 
AS Asphalt Samplers

 

It is made from metal (stainless steel, with stopple and long metal handle.
Specifications: 500 ml, 1000 ml (sample container for liquid asphalt)
Overall dimensions: 400× 200× 200 mm
Weight approx: 5 kg

 
SGB Specific Gravity Bottle

 

It is made from glass of high quality.
Capacity: 20 – 30 ml
Quality: not more than 40 g
Weight approx: 50 g

 
AWCT-1 Asphalt Water Content Tester

 

Measuring cylinder: 600 ml
Diameter of base: 220 mm
Surcharge weight: 5 kg (4 pcs)
Working temperature: 5 ~ 40 ℃
Working humidity: ≤ 85%
Power: 1 KW
Power supply: 220 V, 50 Hz, 1 ph.
Overall dimensions: 400×400× 800 mm
Weight approx: 10 kg

 
ACE-3000 Asphalt Centrifugal Extractor

 

Capacity: 3000 g
Rotating speed: 3000 rpm
Bowl: 280 mm int. dia.
Working temperature: ≤ 35 ℃
Working humidity: ≤ 85%
Power: 500 W
Power supply: 220 V , 50 Hz, 1 ph.
Overall dimensions: 600×440× 620 mm
Weight approx: 60 kg

 
ACE-3000A Automatic Asphalt Centrifuge Extractor

 

Capacity: 1000~3000 g
Accuracy: about 0.1%
Extracting time: 20 to 40 minutes
Rotating speed: 6000 r.p.m.
Working temperature: ≤ 35 ℃
Working humidity: ≤ 85%
Power: 4000 W
Power supply: 220 V , 50 Hz, 1 ph.
Overall dimensions: 1100× 720×1680 mm
Weight approx: 300 kg

 
DBA-1 Drainage Basket Apparatus

 

Used to determine the drainage of bituminous mixtures.
Drainage basket: 100×100×100 mm, stainless steel perforated plate 3 mm dia. with feet
Metal tray: 160×160×10 mm
Overall dimensions: 160×160×110 mm
Weight approx: 600 g

 
SRS-1 Solvent Recovery Device

 

Recovery capacity: 10 liters per hour
Temperature control range: 0 ~ 90℃
Temperature control accuracy: ±0.2℃
Recovery capacity: 10 LPH (liter per hour)
Heating power: 1200 W
Power supply: 220 V, 50 Hz, 1 ph.
Overall dimensions: 290×330×400 mm
Weight approx: 20 kg

 
ACT-1 Asphalt Content Tester(Ignition Method)

 

Max. weight of specimen: 3500 g
Recommended sample weight: 1000-1500 g
Balance: 8100 g  ×  0.1 g
Firebox inner dimensions: 380×490×310 mm
Max. working temperature of firebox: 800℃
Accuracy: 0.01%
Testing time: 20 – 30 minutes
Power: 9000 W
Power supply: 380 V, 3 ph.
Overall dimensions: 800×800×1200 mm
Weight approx: 220 kg

 
RDM-MT Maximum Theoretical Relative Density Meter (Bitumen mixture)

 

Shaking interval: 3 minutes
Container: 5000 ml capacity
V acuum pressure: 4 Kpa
Power: 500 W
Power supply: 220 V, 50 Hz, 1 ph.

 
AMM-10H Asphalt Mixing Machine

 

Mixing capacity: 10 L
Oil bath temperature: 0 – 200℃  (adjustable)
Temperature accuracy:  ±0.5℃
Mixing time: 0 – 999 seconds (adjustable)
Mixing blades rotating speed: 75 r.p.m.
Mixing blades revolution speed: 46 r.p.m.
Heating power: 1500 W
Power supply: 220 V, 50 Hz, 1 ph.
Overall dimension: 1100×700×1200 mm
Weight approx: 200 kg

 
AMM-50 Asphalt Mixing Machine

 

Max. mixing temperature: 300℃
Mixing time: 0 – 999 minutes (adjustable)
Capacity: approx 40 – 50 kg
Power supply: 380 V, 50 Hz

 
WB-20C Digital Constant-temperature Water Bath (stainless steel, electric-heating)

 

Temperature: 25℃, accuracy  ±0.01℃
Bath dimensions: 420×180×105 mm (8 L)
Heating power: 800 W
Cooling power: 200 W
Power supply: 220 V, 50 Hz, 1 ph.
Overall dimensions: 700×300×280 mm
Weight approx: 20 kg

 
MC-1 Manual Marshall Compactor

 

The rammer is lifted and released manually.
Rammer weight: 4.536 kg, 10.21 kg
Drop height: 457.2 mm
Tamping face dia.: 98.5 mm (MC-1A), 149.5 mm (MC-1B)
Specimen size: 101.6 mm dia.  ×  87 mm (MC-1A)
152.4 mm dia.  ×  115 mm (MC-1B
)

 
MC-2 Manual Marshall Compactor

 

Rammer weight: 4.536 kg, 10.21 kg
Drop height: 457.2 mm
Tamping face dia.: 98.5 mm (MC-2A), 149.5 mm (MC-2B)
Specimen size: 101.6 mm dia.  ×  87 mm (MC-2A)
152.4 mm dia.  ×  115 mm (MC-2B)

 
MC-3A Automatic Marshall Compactor

 

Drop height: 457.2 mm
Drop frequency: 60 blows/min
Blows numbers can be set: 0 – 99 blows
Tamping face dia.: 98.5 mm, 149.5 mm
Rammer weight: 4.536 kg, 10.21 kg
Power: 750 W
Power supply: 380 V, 3 ph.
Overall dimension: 700×500×1700 mm
Weight approx: 170 kg

 
MM-1 Marshall Compaction Moulds

 

Consisting of mould body, filling collar and base plate. Steel manufactured, plated against corrosion.

 
GC-150 Gyratory Compactors

 

Compacted specimen size: diameter 150 and 100 mm, height from
30 to 170 mm
Gyrator displacement: 0 – 250 mm, accuracy: 0.10 mm
Gyrator angle: easily adjustable from 0°to 2.0°(adjustable, pre-set 1.16°)
Pressure range: 100 – 1000 kPa (adjustable, pre-set 600 kPa)
Gyrator rate: 50 cycles/min (adjustable, pre-set 30 cycles/min)
Number of cycles (gyrator): 0 – 999
Loading pressure method: pneumatic
Overall dimensions: 900×700×1800 mm
Weight approx: 400 kg

 
MST-30/MST-50 Marshall Stability Tester

 

Capacity: 30 KN (MST-30), 50 KN (MST-50)
Rise rate: 50 mm/min
Breaking head: 101.6 mm dia., 152.4 mm dia.
Flow value: 0 – 15 mm, accuracy 1%
Power: 700 W
Power supply: 220 V, 50 Hz, 1 ph.
Overall dimensions: 700×500×900 mm
Weight approx: 100 kg

 
RC-1 Roller Compactor

 

Slabs obtainable: 300×300×(30 – 100) mm
Roller dimensions: width 300 mm, radius 500 mm
Vertical force: 0 – 20 KN (adjustable)
Load cycle frequency: 6 cycles/minute
Power: 3000 W
Power supply: 380 V, 3 ph.
Overall dimensions: 1216×640×1750 mm
Weight approx: 300 kg

 
WTA-1 Wheel Tracking Apparatus

 

Displacement: 0–30 mm
Deformation accuracy:  ±0.05 mm, resolution: 0.001 mm
Temperature range: 40 – 80℃, accuracy:  ±1℃, resolution: 0.1℃
Specimen size: 300×300×(50 – 100) mm
Wheel load: 0.7±0.05 MPa
Travel of table: 230 mm
Load cycle frequency: 42 cycles per minute
Testing time: 20 – 600 minutes (adjustable)
Power supply: 380 V, 50 Hz, 5000 W
Overall dimensions: 1520×770×1510 mm
Weight approx: 350 kg

 
ACT-2 Asphalt Cohesion Tester

 

Overall dimensions: 400×300×600 mm
Weight approx.: 20 kg

 
AP-1 Asphalt Penetrometer

 

Penetration needle: 2.5±0.05 g
Total weight: 50 g
Specimen container: Φ70×45 mm, Φ55×35 mm
Overall dimensions: 350×240×500 mm
Weight approx: 20 kg

 
WRWAT-1 Wet Rubber Wheel Abrasion Tester

 

Motor rotating speed: 1400 r.p.m.
Abrasion head rotating speed: 140 r.p.m.
Abrasion head revolution speed: 61 r.p.m.
Abrasion head weight: 2.27 kg
Rubber tube: 127 mm long
Timing function: 5 minutes
Power supply: 2200 V, 50 Hz, 1 ph.
Overall dimensions: 600×480×485 mm
Weight approx.: 60 kg

 
PDP-1 Pavement Draining Permeameter

 

Measuring cylinder: 600 ml capacity, 2 ml resolution
Measuring range: 150 mm diameter
Surcharge weight: 25. kg/pc, 4 pcs, total 10 kg
Water level: 600 mm high
Overall dimensions: 560×250×250 mm
Weight approx: 22 kg

 
AP-3 Digital Asphalt Penetrometer

 

Penetration range: 0–50 mm, accuracy: 0.05 mm
Total weight: 100±0.05 g
Standard test needle: 2.5±0.05 g
Power supply: 220 V, 50 Hz, 300 W
Overall dimensions: 250×200×700 mm
Weight approx: 15 kg

 
AP-5 Digital Asphalt Penetrometer

 

Temperature range: room temperature to 90℃
Penetration time: 5 second after starting, freely adjustable
Penetration range: 0 – 40 mm, accuracy: 0.01 mm
Timing range: 0 – 60 seconds, accuracy: 0.1 s
Temperature range: -5℃  to 125℃, accuracy: 0.1℃
Power supply: 220 V, 50 Hz, 600 W
Overall dimensions: 250×200×700 mm
Weight approx: 16 kg

 
ASPT-1 Ring-and-Ball Apparatus (Softening Point Tester)

 

Measuring temperature range: -5 ~ 125℃, accuracy: 0.1℃
Testing range: 5 ~ 90℃
Heating speed: (5±0.5)  ℃/min
Heating mode: speed controlled by PID and fuzzy logic algorithm,
magnetic stirring
Detection mode: manual
Steel ball weight: 3.5±0.05 g
Steel ball diameter: 9.53 mm
Steel ball sinks: 25.4 mm
Timing range: 0 ~ 99 minutes 99 seconds
Working voltage: 220 V, 50 Hz
Power: 1000 W
Outside dimensions: 300×20 ×300 mm
Weight: 12 kg

 
ASPT-3 Asphalt Softening Point Tester

 

Measuring temperature range: -5 ~ 125℃, accuracy: 0.1℃
Testing range: 5 ~ 90℃
Heating speed: (5±0.5) ℃/min
Heating mode: speed controlled by PID and fuzzy logic algorithm, magnetic stirring
Detection mode: manual and auto
Steel ball weight: 3.5±0.05 g
Steel ball diameter: 9.53 mm
Steel ball sinks: 25.4 mm
Timing range: 0 ~ 99 minutes 99 seconds
Working voltage: 220 V, 50 Hz
Power: 1000 W
Outside dimensions: 300×20 ×300 mm
Weight: 12 kg

 
AD-150/AD-200 Digital Asphalt Ductilometer (stainless steel)

 

Max. ductility length: 150 cm (AD-150), 200 cm (AD-200)
Accuracy: 1 mm
Ductility speed: 50 mm/min
Working temperature:  <30℃
Power supply: 220 V, 50 Hz
Auto display average ductility of 3 samples

 
AD-150B/AD-200B Auto Constant Temperature Digital Asphalt Ductilometer

 

Max. ductility length: 150 cm (AD-150B), 200 cm (AD-200B)
Accuracy: 1 mm
Ductility speed: 50 mm/min (fast), 10 mm/min (slow)
Working temperature: 5 – 50℃
Power supply: 220 V, 50 Hz
Auto display average ductility of 3 samples

 
AD-15B/20B/15C/20C Asphalt Ductilometer

 

Model

AD-15B/20B              

AD-15C/20C         

Extension length

1.5m /2m  precision 1mm

Temperature controlled range                          

-5~80  precision ±0.1

Max pulling force

 

100Kg  precision ±0.5Kg

Extension speed

10mm/Min /50mm/Min

Cooling power

1.2KW

Heating power

2.0KW

Outside size

2700x800x1100mm(2m), 2300x800x1100mm(1.5m)

Weight

300KG

Voltage

220V

Power

3KW

Ambient temperature 

5~40

Ambient humidity

≤85%

Function

Printing function

Printing and force measurement function

 
AD-15A/20A Asphalt Ductilometer
 

Extension length

1.5m/2m  precision 1mm

Temperature controlled range

-5~80℃  precision ±0.1℃

Extension speed

10mm/Min /50mm/Min

Cooling power

1.2KW

Heating power

2.0KW

Outside size

2700x800x1100mm(2m),2300x800x1100mm(1.5m)

Weight

300KG

Voltage

220V

Power

3KW

Ambient temperature 

5~40℃

Ambient humidity

≤85%

 
AFPT-1 Asphalt Flash Point Tester

 

Heating power: 0 – 600 W (adjustable)
Thermometer: -6 – 400℃, division of 2℃
Power supply: 220 V, 50 Hz, 650 W
Overall dimensions: 500×400×300 mm
Weight approx: 8 kg

 
LHO-1 Loss on Heating Oven

 

Rotating speed: 5 r.p.m.
Temperature: 163℃, accuracy:  ±0.5℃
Total power: 2000 W
Chamber size: 450×450×500 mm
Power supply: 220 V, 50 Hz
Overall dimensions: 700×800×1100 mm
Weight approx: 300 kg

 
TFO-2 Asphalt Thin Film Oven

 

Rotating speed: 5 r.p.m.
Temperature: 200℃, accuracy:  ±1℃
Total power: 2800 W
Chamber size: 450×450×500 mm
Power supply: 220 V, 50 Hz
Overall dimensions: 800×800×1200 mm
Weight approx: 110 kg

 
TFO-5 Rolling Thin Film Oven

 

Rotating speed: 15 r.p.m.
Temperature: 163℃, accuracy:  ±0.5℃
Total power: 2800 W
Chamber size: 395×465×450 mm
Power supply: 220 V, 50 Hz
Overall dimensions: 900×900×1200 mm
Weight approx: 120 kg

 
AWCT-2 Asphalt Wax Content Tester

 

Used to determine the wax content of petrol asphalt. It can do tests on 3 samples.
Heating power: 1500 W
Cooling power: 1000 W
Mixing motor: 1400 r.p.m.
Minimum temperature: - 30℃
Temperature control accuracy:  ±0.5℃
Overall dimensions: 680×520×1170 mm (cooling)
Weight approx: 100 kg

 
AWCT-2A Accessories for AWCT-2 wax content tester

 

Vacuum:  <133
Temperature: 50 – 250℃
Accuracy:  ±1℃
Power supply: 220 V, 400 W
Overall dimensions: 500×400×375 mm
Weight approx: 65 kg

 
AV-S Asphalt Saybolt Viscometer

 

Temperature range: room-temperature ~ 240℃, accuracy:  ±0.1℃
Bath: 250×200×145 mm
Power supply: 220 V, 50 Hz, 1 ph., 650 W
Overall dimension: 450×300×600 mm
Weight approx: 45 kg

 
AV-D Dynamic Viscometer

 

Temperature range: 0.00 ~ 100.00℃
Temperature accuracy: ± 0.01℃
Pressure range: 300 ± 0.5mmHg
Timing range: 0.0S ~ 999.9S
Timing accuracy: ≤ 0.05%
Measuring range: About 4.2 ~ 580000 Pa. S
Sample quantity: 4PCS

 
ASST-1 Asphalt Storage Stability Tester

 

Glass cylinder effective height: 310±10 mm
Calibration line: 250 ml
Specimen input opening: Φ32±0.1 mm
Overall dimensions: 400×180×50 mm
Weight approx: 3 kg

 
BPA-F Breaking Point Apparatus (Fraass method)

 

Overall Dimensions: 400*200*200 mm
Weight approx: 3 kg

 
Multi-function CBR & Marshall Testing Machine

Maximum rated load

0-99.99KN, 0-30KN

Resolution: 0.001mm

Precision: better than 0.5%

Displacement range

0-15mm

Maximum moving distance of screw rod

200mm

Motor speed

Fast speed: 50mm/min 

Slow speed: 1mm/min

Manual speed

0.2mm/crank each circle

Motor specification

750W

Weight 

210KG

Dimensions

1200×700×1450mm

Supply voltage

380V

Power

1200W

Environmental temperature

35℃

Relative humidity

85%

 
BCTM-30 Bending Creep Testing Machine

Maximum load and precision                       

30kg,±5g

Displacement measurement range and precision

020mm, ±0.01mm

Temperature range and precision

60℃-20℃0.1℃

Time measurement range and precision

0-60min , ±1S

Outside size

880×480×1000mm

Ambient temperature

30℃

Relative humidity

≤85%

Overall Power Consumption

2KW

Net weight

130KG

Voltage

220V

 
SSS-3N Standard Sieve Shaker

 

Working voltage

220V 50HZ

380V 3phase

Sieve diameter

200mm, 300mm

Amplitude of sieve block

8mm

Shaking frequency

221TPM

Vibration attack frequency

147TPM

Gyration radius

12.5mm

Motor power

0.37KW

 
Standard Testing Sieves
 
  PRODUCT LIST
 
Soil
Concrete
Cement
Sand & Aggregate
Rock
Asphalt & Bitumen Mixture
Testing Machines
General Equipment
 
 
 
点击添加我作为你的新联系人,若点击后没有提示框弹出,请手动添加账号或下载最新版 Windows Live Messenger 8.0
 
 
 
  HOME  |  PRODUCT  |  NEWS  |  ABOUT US  |  CONTACT US  |  Powered by DACHENG Geotest equipments